Non credo che ci sia qualcosa di così dettagliato come /proc/cpuinfo di Linux . Guarda in sysctl hw e /var/run/dmesg.boot . La maggior parte delle informazioni come velocità della CPU e set di istruzioni dovrebbero essere lì da qualche parte.
Questo è ciò che vedo (con alcuni hw.* poco interessanti campi rimossi):
$ uname -sr
FreeBSD 4.10-RELEASE
$ grep -i cpu /var/run/dmesg.boot
CPU: Pentium III/Pentium III Xeon/Celeron (448.97-MHz 686-class CPU)
$ /sbin/sysctl hw
hw.machine: i386
hw.model: Pentium III/Pentium III Xeon/Celeron
hw.ncpu: 1
hw.byteorder: 1234
hw.physmem: 665989120
hw.usermem: 604614656
hw.pagesize: 4096
hw.floatingpoint: 1
hw.machine_arch: i386
hw.aac.iosize_max: 65536
hw.an.an_dump: off
hw.an.an_cache_mode: dbm
hw.an.an_cache_mcastonly: 0
hw.an.an_cache_iponly: 1
hw.fxp_rnr: 0
hw.fxp_noflow: 0
hw.dc_quick: 1
hw.ste.rxsyncs: 0
hw.instruction_sse: 0
hw.availpages: 162432
(Notare che su OpenBSD, la velocità della cpu si trova in hw.cpuspeed invece che in dmesg.)
Usa dmidecode comando:
# dmidecode -t processor -t cache
# dmidecode 3.0
Scanning /dev/mem for entry point.
SMBIOS 2.4 present.
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: LGA 775
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: F6 06 00 00 FF FB EB BF
Signature: Type 0, Family 6, Model 15, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
Voltage: 1.4 V
External Clock: 266 MHz
Max Speed: 3800 MHz
Current Speed: 2394 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: 0x0007
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
......